HyrePest

HyrePest tools

Termite inspection checklist

Six areas an inspector needs to reach. Tick what you have cleared and the list tells you what is left. Anything blocked goes on the report as not inspected.

6 areas to open up before the inspector arrives A report covers what the inspector could see on the day. HyrePest does not inspect houses.

Termite inspection checklist: an inspector looks for visible termite evidence and conditions in the crawl space, attic, garage, plumbing areas, around the foundation outside and by the water heater. Clear each of these before the visit. Any area that cannot be reached is usually listed on the report as not inspected.

The report records visible evidence on one day. North Carolina Department of Agriculture and Consumer Services says it is not a warranty.

Six areas to clear

Tick what is done. Nothing is emailed.

— Ready
— Still to clear
— What the report will be

What this assumed —

A prep list, not an inspection. HyrePest does not inspect houses.

How the termite inspection checklist works

Each tick marks an area you have opened up. The result lists what is still blocked.

Six areas, one count. The areas match the parts of a house a wood destroying insect report asks about: substructure, attic, garage, plumbing penetrations, exterior foundation and utility closets.

What is left is the useful part. Every area still blocked is one the inspector may write up as not inspected. A report full of exclusions says little.

It never says you are clear. Six of six means the inspector can look. It does not mean anything will or will not be found. For what happens next, see termite inspection.

What the inspector checks in each area

Each area has its own clues. Knowing them helps you ask better questions when the report comes back.

AreaWhat the inspector looks forWhat you clear
Crawl spaceMud tubes on piers and foundation walls, damp soil, wood touching soil, damaged sills and joists.The access hatch and the path to it.
AtticDamaged rafters, signs of roof leaks, drywood termite pellets in some regions.The hatch and the area under it.
GarageTubes on the slab edge and wall base, damaged sill plates.Boxes and shelves pulled off the walls.
Plumbing areasGaps where pipes pass through the slab, leaks, soft wood under tubs and sinks.Cabinets under sinks emptied.
Exterior foundationTubes, siding below grade, mulch or soil against siding, firewood stacks.Mulch, firewood and storage moved back.
Water heater and laundryLeaks and soft flooring near appliances.The floor around them.

What to ask when the report arrives

The answers are on the report or should be.

  • Which areas were not accessible, and why?

    Those areas are not covered by the conclusion.

  • Is any evidence active or old?

    Old and live tubes look alike to most people. Ask how the inspector told them apart.

  • What conducive conditions were listed?

    Moisture and wood contact are jobs to fix whether or not termites are found. See the termite risk checklist.

  • Is a treatment offer attached to the report?

    An inspection and a treatment are two jobs and can come from two companies. Check the license with the license lookup helper.

Questions this tool answers

What does a termite inspector look for?
Visible evidence of wood destroying insects (mud tubes, damaged wood, shed wings, live insects) and the conditions that invite them, such as moisture and wood touching soil. Many inspections are written on the NPMA-33 form.
How do I prepare for a termite inspection?
Clear the crawl space hatch and attic hatch, pull boxes off garage walls, empty cabinets under sinks, and move mulch, firewood and stored items away from the foundation. Use the checklist above to track it.
What happens if an area is blocked?
It is usually recorded as not accessible. The report then says nothing about that area. Read the inaccessible areas section before the conclusion.
Is a termite inspection report a warranty?
No. North Carolina Department of Agriculture and Consumer Services says the wood destroying insect report is “not a warranty as to the absence of wood-destroying insects; it is a report of the visible presence or absence of wood-destroying insects at the time of the inspection”.
What does a termite inspection cost?
We publish no prices because we hold no sourced quotes. Ask for the fee in writing, and ask whether the inspection is tied to a treatment offer. See the cost hub for what drives the price.
Does HyrePest do termite inspections?
No. HyrePest is a publisher. It does not inspect, treat or bond houses, and company matching is not live yet.

Sources and methodology

Figures dated October 26, 2026. Last reviewed .

Link to or cite this tool

Free to link from a blog, a listing or a resource page. Copy the HTML, or use the citation.

Related

Find a Pest Control Company Back to the homepage