Pest problems
Termite damage: what it means and what to do
Damaged wood shows where termites fed. Whether they are still feeding, and whether the wood still holds, are two more questions.
Find a Pest Control Company What it costs
Written by HyrePest Research Desk Primary-source research and fact checking
The short answer
Termite damage is wood that has been hollowed from the inside, often leaving a thin outer shell that a screwdriver pushes through. UC IPM says subterranean termites feed along the grain and eat the softer wood first, a pattern that helps tell their damage apart from other pests.
If this is happening now
If a floor feels spongy, a beam sags, or a deck or stair rail feels loose, stop using it and keep people off it until a contractor has checked it. A pest inspection does not assess whether the structure is safe.
Key takeaways
Old damage can sit for years after a colony is gone. Live termites or rebuilt mud tubes show activity.
A licensed pest company treats termites. A contractor or structural engineer judges and repairs the wood.
Georgia’s rule makes termite contracts state whether they cover retreatment only, or repair as well. Ask the same question in any state.
Leave damaged wood in place until it has been inspected, unless it is unsafe.
What does termite damage usually mean?
The pattern in the wood points to the termite, and sometimes to a different pest entirely.
UC IPM says subterranean termites follow the grain and leave the harder wood. Mud inside the galleries is typical.
UC IPM says drywood termites can cut across the grain, and their galleries hold pellets rather than soil.
UC IPM names darkening or blistering of structural wood as a possible sign, with the surface thin and easy to puncture.
Can be termites under the surface, or moisture. Both need a look.
Can follow damage to frames, though moisture and settling cause it too.
Is it termites, carpenter ants or rot?
Each has a different cause and a different fix.
| What it might be | How to tell |
|---|---|
| Subterranean termites | Galleries follow the grain, lined with mud. Mud tubes nearby. See termite mud tubes. |
| Drywood termites | Clean chambers with pellets, small kick-out holes. See termite droppings. |
| Carpenter ants | UC IPM: they do not eat wood but dig nests in it, often starting where wood is already wet or decayed. Galleries are smooth, and the debris is fibrous sawdust. |
| Wood rot | Soft, crumbly or cracked wood with no galleries. Termites and carpenter ants are both drawn to it, so rot and insects often come together. |
What to check today
Map the damage so an inspector and a contractor can both use it.
EPA suggests probing exposed wood for hollow spots. Work out from the damage until the wood is solid.
Live insects, fresh mud, or pellets that return after cleaning.
UC IPM says subterranean termites need moisture and are often found in slightly decayed wood. Look for a leak, gutter or grade problem nearby.
Sill plates, joists, beams and posts matter more than trim.
Drill holes in a slab or foundation, or old bait stations, mean someone treated before. Ask the seller or past owner for records.
Safe first steps
Keep the evidence, stop the water, and make the house safe.
Take photos with a tape measure for scale and note exactly where each area is.
Block off any sagging floor, loose step or rail until a contractor has looked at it.
Repair leaks and redirect downspouts. EPA advises fixing leaks right away and keeping soil by the foundation dry.
Removing damaged wood before the inspection takes away what the inspector needs to see.
Repairing wood before the termites are treated invites them into the new wood.
When to call a licensed company
Call a licensed pest company for any damage you cannot prove is old, and before any repair. UC IPM says a professional inspection is usually required to confirm an infestation.
Ask for a written report, and ask your contract to say plainly whether it covers retreatment only or repair of damage too. If structural wood is affected, also get a contractor or engineer to assess it.
Repairs are priced separately from treatment; see what pest control costs.
What to ask before you sign
Is this damage active or old? What is your evidence?
Does your contract cover repair of damage, or only retreatment?
Is damage found today excluded from any warranty?
Do you recommend a contractor or engineer look at this wood?
What moisture problems must I fix for the treatment to hold?
Your inquiry
Tell us about the work
Three short steps: the job, your home, and how to reach you. Nothing goes to a pest control company unless you agree.
Free, with no obligation: a person at HyrePest reads it and replies. Matching is not live yet, so this is not a quote or a dispatch line. For an active problem today, call local pest control companies directly and check their license first.
Find a Pest Control Company
Tell us what you have seen and where you are. A person at HyrePest reads it and replies about the next step.
Questions
What does termite damage look like?
Can termite damage be repaired?
Does homeowners insurance cover termite damage?
How fast do termites damage a house?
Is old termite damage a problem if the termites are gone?
Written and audited by
HyrePest Research Desk
Primary-source research and fact checking
We are not a pest control company. We read the pesticide label rule, the agency guidance and the state board record ourselves, and publish each point with its source and the date we retrieved it.
Where a claim cannot be traced to a primary source, we leave it out and say so. We hold no dataset of pest control prices, so we publish no average price.
- 25
- primary-source pages (EPA, CDC, eCFR, state boards) behind the fact base
- 7
- common claims we checked, could not verify, and do not repeat
- 10
- calculators that use your numbers, not a national average
- 0
- average prices published, because we hold no price data
How this desk works
- Primary sources only. Label law comes from FIFRA and 40 CFR 156, safety guidance from EPA and CDC, licensing from the state board that issues the license. We do not cite an article that cites a source.
- Every figure carries its retrieval date. Agency pages and board rules change. A statement without the date it was read cannot be checked.
- Identify before treating. We describe what separates one pest from another and what a good inspection looks at. We never diagnose a species from a description, and we never give pesticide application instructions.
- What we could not verify is published too. Claims that circulate widely but trace to no current primary source are listed and left out of the pages.
Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.
Sources & retrieval dates
Information on this page is general and varies by species, region, construction and your own circumstances. It is not pesticide application advice, and a pesticide label is a legally binding instruction that takes precedence over anything written here.
HyrePest is not a pest control company: we inspect nothing, treat nothing, apply no pesticide and bond no structure. This page explains the work so you can read a proposal and judge the company that wrote it.